Industrial Connectors / PowerConLocking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. Fast and easy locking system. High current capacity (20 A rated). Extremely robust and reliable. Meets all prevailing safety standards. UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCon is a connector without breaking capacity, i.e. the PowerCon should not be connected or disconnected under load or live!
Mounting connector for 5 - 15 mm cable O.D. rangePremating safety ground
Quicklock with securing lever
With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit
Appropriate plugs are identified by mechanical keyways and by color
Connector type: Powercon (gray)
Plug construction: Mounting version
Made in Europe
Technické parametry | IP classification | IP20 |
| Weight | 0,01 kg |
| Number of contacts | 2 + PE |
| Rated current per contact | 20 A RMS |
| Rated voltage | 250 V AC |
| Dielectric strength | 4000 V DC |
| Contact resistance | |
| Insulation resistance after damp heat test | >,100 Mohms |
| Creepage distance | according to IEC 664-1 |
| Cable retention force | = 220 N, depending on cable dia and material |
| Wiring | Flat tabs for FASTON 4.8 mm x 0.5 mm (0.187'' x 0.02'') or soldering |
| Solderability | complies with IEC 68-2-20 |
| Housing | PA 6 30% GR |
| Insert | PA 6 30% GR |
| Contacts | CuZn39Pb3 / CuSn6 |
| Contact surface | L+N 20 m Ag plated, Earth 4 m Ag plated |
| Chuck | POM |
| Temperature range | -30C to +80C |
| Flammability | UL94HB |
