Compact, strong, small.
The VIPER S with 650 Watt and a powerful output of approx. 8 meters perfectly completes the Viper range.

In general

This fog generator with 650 Watt and an powerful output of approx. 8 meters perfectly completes the Viper range.

The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses.

The Viper S is characterised ba a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output.

Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines.

Features

DMX 512 as standard

The VIPER S can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.

The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

A radio remote is also available as an option.

Internal timer

With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations.

Advantages

• DMX as standard, analog and stand-alone-mode
• Internal timer
• Fog output adjustable in steps of 1% (0 - 99%)
• Continuous output
• Easy handling
• Powerful output
• Made in Germany

Technical data

Procedure	Vaporizing fog generator
Power requirement	650 Watt
Voltage	230 V / 50 Hz 120 V / 60 Hz
Warm up time	approx. 7 min.
Fluid consumption at max. output at continuous output	60 ml/min. 15 ml/min.
Fluid tank capacity	750 ml
Fog output	adjustable in 99 steps
Output projection	max. 8 m
Fogging time at 100% output at < 50% output	approx. 22 Sec. Continuous output
Control	DMX 512 0 – 10 V analog Stand-alone-Mode Radio remote (Option))
Temperature control	Microprocessor controlled
Overheating protection	Heater block/Thermostat Pump/Thermal switch
Dimensions (L x W x H)	35 x 18 x 19 cm
Weight without bottle	approx. 5.4 kg

Fluid

The following Look-fluids are available for the VIPER S:

• Quick-Fog (thick, quick disappearing fluid)
• Regular-Fog (thick, long lasting fluid)
• Slow-Fog (thick, extremly long lasting fluid)

Downloads

Data sheet Viper S.pdf

Manual Viper S.pdf

Manual Viper S usa.pdf